Does the load rating hold when the carriage is fully extended?
That is the correct question to ask every supplier. Herochu rates the roll-out mechanism at the stated load through the full extension cycle, and the anchor design accounts for the shifted center of gravity. A rating that applies only in the retracted position does not reflect how the rack is actually used.
Can a roll-out rack replace an existing fixed cantilever rack without changing the crane?
In many cases yes, provided the crane’s hook coverage extends over the new rack face and the hook height clears the top tier. Herochu reviews crane coverage and lift path as part of the layout, because a mechanically sound rack outside the crane’s reach is not a functional installation.
What happens if the crank mechanism jams under load?
The rack-and-pinion drive is accessible for inspection and service, and the carriage can be released and returned manually following the service procedure. Preventive inspection of the guide rails and pinion engagement is the primary safeguard; grit and scale accumulation are the usual causes of increased crank effort, not mechanical failure.
Is a motorized version available for very high-throughput bays?
Herochu offers electrically driven roll-out options for bays where retrieval frequency justifies powered operation. For most heavy-duty pipe and tube storage, the manual crank remains the lower-maintenance and lower-infrastructure choice, because the crane does the vertical work and the crank only moves the carriage horizontally.
What does “telescopic” add over a standard crank-out rack?
On a telescopic model, the arm sections and carriage retract to a shorter parked envelope, which matters in bays with limited aisle width or low clear height. The crank-out function is the same; the telescopic travel reduces the space the rack occupies when idle.

Can the rack be used with a vacuum lifter instead of a crane hook?
Yes, provided the lifter’s headroom and approach path are included in the layout. The fully extended tier presents a flat, unobstructed top surface, which suits vacuum lifting as well as hook-and-sling picks. The rack specification should identify the lifting method so the arm spacing and end-stop geometry match the attachment.
How does the manual crank perform on a 5-ton tier?
The roller-bearing carriage and gear ratio are sized so one operator can extend and retract a rated load without auxiliary power. The effort is higher than an empty tier, but it remains within normal manual operating limits because the bearings carry the load and the crank only overcomes rolling resistance and the slight grade of the guide rail.
Does Herochu customize compartment width and divider layout?
Yes. The HC-G and telescopic lines are built to the material mix rather than a fixed catalog footprint. Compartment widths, divider positions, arm lengths, and layer counts are specified from the pipe diameter range, bundle weights, and the number of SKUs the bay must hold.










