Crank-Out Cantilever Racking for Long Pipe & Tubing Storage
A crank-out cantilever rack stores pipe and tubing on arms that roll clear of the frame when an operator turns a hand crank. The arms reach 100% extension, so a crane lifts the bundle in open air instead of reaching into a pocket. Herochu builds single and double-sided units up to eight levels high.
Crank-Out Cantilever Racking for Long Pipe & Tubing Storage
Why pipe racks fail at the point of retrieval
Pipe is simple to store and awkward to retrieve. A static cantilever holds a bundle well; the cost appears when the bundle a job needs is the third one back. An operator reaches in with a hook, drags a length over the arm tips, or climbs the frame to sling from above. Every move costs time and marks the pipe underneath.
Crank-out storage turns that around. The arms carry the bundle into the aisle on a shaft drive, so the material arrives where the hook already is. The rack travels; the operator stays on the floor with both hands free for the sling.
How does the crank mechanism move a loaded bundle?
Each arm pair is welded to a receptacle. Receptacles are linked by connecting shafts to a control panel at the end of the unit, and one hand crank drives the whole column out and back in a single stroke. Because the load stays on the arms and the arms ride on rollers, the crank does not lift weight; it overcomes rolling resistance through a reduction gear.
Extension is 100%, so the arms clear the frame line completely. Nothing stays buried in a pocket, and the crane lifts vertically, the direction a hook is built to work in. Retraction returns the bundle to the same stored position every time.
What does full extension change for the crane operator?
The sling goes around the balance point, not whichever section of pipe is reachable.
No side pull on the hoist, so bundles rise clean instead of swinging against the frame.
Full length visible: heat numbers, end caps and cut marks get checked without unloading.
Hook travel shortens and a two-person lift becomes a one-person lift.
How long does a retrieval take?
About five minutes, whether the job needs one length or the whole bundle. The work runs in a straight line: crank out, sling, lift, crank back. Nobody unloads front bundles to reach rear ones, which is where floor storage loses its hours.
Delivery follows the same path. A truck bundle is set on the arms by crane, cranked in, and the aisle is clear before the vehicle leaves the yard.
Which pipe and tube profiles belong on a crank-out rack?
Seamless and welded pipe, small bore through heavy wall line pipe
Stainless and alloy tube that cannot be dragged across steel arms
Square, rectangular and circular hollow sections in mill bundles
Extruded profiles and long bar stock sharing the same bay
Static cantilever, roll-out rack or floor stack?
Retrieval compared across three ways of holding the same pipe bundle
|
Storage method |
How the load is reached |
Aisle demand |
Typical retrieval |
Damage exposure |
|
Floor stack |
Unstack by forklift or by hand |
Wide turning space |
Slow when the target is buried |
High: abrasion, fork contact, crushed ends |
|
Static cantilever |
Hook, drag or climb the frame |
One aisle per rack face |
Depends on bundle position |
Moderate: surface drag, arm tip damage |
|
Crank-out cantilever |
Arms roll into the aisle |
One aisle serves both faces |
About five minutes |
Low: bundle stays supported and separated |
Speed is only part of it. A floor stack needs a forklift and a driver for every move, and the bottom bundle pays for the ones above it. A static cantilever removes the forklift but keeps the reach, and the reach is where pipe damage starts.
How should the unit sit under the crane?
Hook height sets the levels a building can truly serve, not the number a drawing allows. A unit runs to eight levels and roughly 20 ft of cube, but the top arm still has to be reachable by the hoist with a sling attached, and that clearance is measured on site.
Crane span sets orientation: arms parallel to the runway let the trolley travel along the bundle instead of across it. A double-sided unit served from one aisle halves the aisle count and shortens crane travel.
Which options protect the pipe?
Support trays stop small pipe from rolling between arms. Dividers separate SKUs, lengths and remnants, so a mixed order does not become a search. Liners protect stainless, coated and machined tube, and finishes follow the room: painted indoors, galvanized for wash-down or coastal air. Lift integration matches the receptacle to the crane already in the bay.
FAQ
Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!
Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.
Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.
Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.
Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.
Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.
Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.
Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.
Q8: How do you ensure product quality?
Our quality assurance includes:
A team of over 40 technical engineers for professional debugging and support.
A dedicated quality control department compliant with ISO9001 standards.
CE certification for all exports.
Rigorous load testing before shipment to ensure structural safety and reliability.
Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.
Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.
Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.
Customer visit
Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.
Factory
Hot Selling Machines
-
Hand Cranked Pipe Rack
Crank-Out Roll-Out Cantilever Rack Designed for Storing Long Material
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Steel Pipe Storage Rack with Manual Crank-Out Cantilever Arms
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Customizable Heavy Duty Hand Crank Pipe Storage Rack
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Crank-Out Cantilever Racking for Long Pipe & Tubing Storage
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Drawer Roll Out Sheet Metal Rack
Read moreRated 0 out of 5 -
Motorized Sheet Metal Rack
Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Plate Magazine System with Drawer Design for Heavy Load Plate Handling
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
Read moreRated 0 out of 5
Related products
-
Pipe Storage Rack
Steel profile storage racks & Long Span Rack | Steel bar drawer rack
Read moreRated 0 out of 5 -
Pipe Storage Rack
Tube Bar Cantilever Rack | Bars and Tubes Storage Systems
Read moreRated 0 out of 5 -
Pipe Storage Rack
Pvc pipe racking system PVC Pipe Storage Telescopic Cantilever Rack
Read moreRated 0 out of 5
















