Automatic Loading and Unloading Fiber Laser Cutting Machine with Storage System

How does a storage-connected loading system improve fiber laser throughput? It removes the two delays that most often stop a fiber laser: waiting for the next sheet and waiting for the next material grade. The loading device handles sheet transfer; the storage system handles material access. When they share one control environment, the laser can run a sequence of different materials without an operator changing stacks . Herochu builds this arrangement as a cell rather than as separate pieces of equipment.

Automatic Loading and Unloading Fiber Laser Cutting Machine with Storage System

How does a storage-connected loading system improve fiber laser throughput? It removes the two delays that most often stop a fiber laser: waiting for the next sheet and waiting for the next material grade. The loading device handles sheet transfer; the storage system handles material access. When they share one control environment, the laser can run a sequence of different materials without an operator changing stacks . Herochu builds this arrangement as a cell rather than as separate pieces of equipment.

The logic of a storage-connected cell

A standalone loader depends on prepared input stacks. A storage-connected loader depends on managed storage positions. The difference appears when the schedule calls for a material change. In a standalone arrangement, someone must clear the input position and place the next stack. In a storage-connected arrangement, the PLC retrieves the required material and the loading device places it on the shuttle table.

Herochu’s storage-connected configurations use a dual-tower architecture with 8 to 13 floors, 3 t or 5 t per layer, and repeatability of ±0.5 mm through linear guide rails and precision chain drives . The cell supports raw-material output, cutting, unloading and cut-material return, so the tower is not only an input buffer but part of the material flow.

Single-tower, dual-tower and multi-machine arrangements

A single-tower configuration is the entry point. It provides managed storage and automated handling for one laser, with a smaller footprint and a lower starting investment. Herochu’s single-tower starter configuration begins at US$8,900, with double-tower and multi-laser loops quoted separately .

A dual-tower arrangement places two synchronized towers around the laser shuttle table. The dual-tower plate warehouse stores up to 65 t of raw sheet in a compact footprint and supports sheet formats from 3015 to 6025 mm . It suits schedules that need more material positions or longer unattended runs.

A multi-machine arrangement uses one handling resource to serve more than one laser. The dispatch sequence becomes the critical design question. When two cutters request service at the same time, the control system must decide which retrieval and loading task runs first. The useful test is not the maximum speed of the loader but the behavior of the queue under simultaneous demand .

Cycle time and the cutting cycle: matching the two

A loading and unloading cycle of 60 seconds or less is common in Herochu’s fiber laser configurations, with inlet/outlet speeds of 12 m/min and vertical lifting at 9 m/min . A storage tower adds retrieval time to that cycle. The combined handling interval must remain shorter than the cutting interval for the material being run.

If the laser cuts a nest in three minutes, a 60- to 90-second handling cycle provides margin. If the nest cuts in 45 seconds, the handling system needs parallel preparation or buffering, or the laser will wait regardless of storage capacity. The selection question is therefore not “how fast is the loader” but “does the complete retrieve-load-cut-unload-return sequence keep the cutting head busy for this material mix.”

Layout, access and the return path

A storage-connected cell needs space for the tower, the loading device, the unloading path and the return of cut material. Herochu’s double-tower layout is designed to fit a footprint smaller than two parking spaces while storing up to 65 t, but the installation still requires checking overhead beams, floor loading and replenishment access .

The return path deserves particular attention. Cut material that returns to storage occupies positions that might otherwise hold new stock. A tower with many physical levels may have fewer usable input positions once the production plan reserves space for returns. The layout should identify raw-stock positions, processed-material destinations and any shared positions before the tower configuration is fixed.

What to verify in a proposal

Confirm that the quoted scope separates loading, unloading, storage retrieval, cut-material return and part sorting. Confirm the sheet sizes, weights and thicknesses the system handles automatically, and ask what happens when a job falls outside that range. Confirm the dispatch logic when multiple cutters share one loader. Herochu’s systems are quoted with these functions identified separately, with plug-and-play interfaces to common fiber laser controls .

The practical starting point is a production week’s record of where the laser waits. If the wait is stock access, the storage-connected cell is the relevant configuration. If the wait is sheet transfer, a standalone loader may deliver the same gain with less scope. If both appear, the cell should connect storage and handling as one controlled flow. Herochu builds both arrangements, and the specification should follow the observed delay rather than the equipment label.

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Customer visit

Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.

customers

Factory

Factory
Factory
Factory
Factory
Factory
customers2
honor

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com