Steel Pipe Storage Rack with Manual Crank-Out Cantilever Arms
A steel pipe storage rack with manual crank-out cantilever arms keeps bundles overhead and brings them to the aisle on a hand-cranked shaft. The load never leaves the arms, so one operator can sling a bundle in about five minutes without a forklift, a spotter or a climb. Herochu engineers each unit to the pipe schedule.
Steel Pipe Storage Rack with Manual Crank-Out Cantilever Arms
How does a manual crank move a loaded arm?
The crank does not lift. It drives a receptacle along rollers through a reduction gear while the load rides on arms that stay level. Effort tracks rolling resistance and gear ratio, not the weight on the arm, which is why a bundle no two people would lift by hand still moves with one hand on a handle.
The control panel sits at the end of the unit at working height, and one handle drives the whole column through connecting shafts. Levels therefore move together and a bundle stays aligned as it travels. The geared drive holds position when the handle is released, so nothing runs on into the aisle.
What does one retrieval look like?
A pick runs on the same five steps, whatever the bundle:
Check the bundle tag against the pick list at the panel.
Crank the receptacle out until the arms clear the frame line.
Sling at the balance point; the full length is exposed, so the sling lands where it should.
Lift vertically, clear of the arm tips, then travel along the runway.
Crank the arms back in before the next pick, keeping the aisle open.
Start to finish, that is about five minutes for one length or a full bundle. Predictability earns more than raw speed here: a store where any pick takes the same short time stops hoarding material near the door.
Why take the forklift out of the aisle?
Ask a safety officer what goes wrong in a pipe yard and the answers repeat: a load shifting on forks, a pedestrian inside the turning circle, someone climbing a stack to reach a sling. Crank-out storage removes all three from the retrieval path. The crane lifts vertically, the operator stands at a panel outside the load path, and nothing is stacked on anything.
Throughput improves for a less obvious reason. A forklift working a pipe store spends much of its day reversing with a 12 m load, and each move blocks the aisle for other traffic. When the rack brings the pipe out, the truck goes back to production work.
How do the handling methods compare?
Handling the same 12 m bundle three ways
|
Method |
Operators |
Aisle demand |
Time per bundle |
Hazard exposure |
|
Floor stack and forklift |
Two: driver and spotter |
Wide turning circle |
Long once the bundle is buried |
Struck-by, pinch points, load shift |
|
Static cantilever and crane |
One or two |
One aisle per rack face |
Reach and drag before the lift |
Surface damage, manual handling |
|
Crank-out cantilever and crane |
One |
One aisle serves both faces |
About five minutes |
Controlled vertical lift only |
The table explains why plants with an existing crane convert first. The crane was never the bottleneck; the reach was. Moving the arms removes the reach without buying another piece of lifting equipment.
What maintenance does a manual system need?
A crank drive is close to maintenance-free. What remains is short and needs no specialist:
Shaft couplings and roller tracks checked for wear at each service interval.
Handle and gearbox checked for play, which shows as a handle turning before the arms move.
Arm tips and liners checked for deformation after a mis-slung lift.
Anchors checked after any impact, since the base plates carry the overturning moment.
When does manual stop and powered start?
Manual drive suits a store where one operator moves a few bundles a shift and bundle weight sits inside the geared range. Herochu sizes the drive to that duty cycle, so a bay running dozens of picks, or bundles at the top of the range all day, gets a powered drive or lift integration instead. The frame does not change; the drive does. The honest test is torque, not tonnage: a loaded column that needs two hands on the handle is an undersized drive.
Which safety details get missed?
Arm tip markers, so a crane operator can see the extension line from the cab.
Floor marking in front of the unit, keeping feet outside the load path.
A load chart per level posted at the panel instead of filed in an office.
End stops rated to the bundle, not to the pull on the handle.
FAQ
Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!
Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.
Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.
Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.
Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.
Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.
Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.
Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.
Q8: How do you ensure product quality?
Our quality assurance includes:
A team of over 40 technical engineers for professional debugging and support.
A dedicated quality control department compliant with ISO9001 standards.
CE certification for all exports.
Rigorous load testing before shipment to ensure structural safety and reliability.
Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.
Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.
Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.
Customer visit
Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.
Factory
Hot Selling Machines
-
Hand Cranked Pipe Rack
Crank-Out Roll-Out Cantilever Rack Designed for Storing Long Material
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Steel Pipe Storage Rack with Manual Crank-Out Cantilever Arms
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Customizable Heavy Duty Hand Crank Pipe Storage Rack
Read moreRated 0 out of 5 -
Hand Cranked Pipe Rack
Crank-Out Cantilever Racking for Long Pipe & Tubing Storage
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Drawer Roll Out Sheet Metal Rack
Read moreRated 0 out of 5 -
Motorized Sheet Metal Rack
Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Plate Magazine System with Drawer Design for Heavy Load Plate Handling
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
Read moreRated 0 out of 5
Related products
-
Pipe Storage Rack
Steel profile storage racks & Long Span Rack | Steel bar drawer rack
Read moreRated 0 out of 5 -
Pipe Storage Rack
Tube Bar Cantilever Rack | Bars and Tubes Storage Systems
Read moreRated 0 out of 5 -
Pipe Storage Rack
Pvc pipe racking system PVC Pipe Storage Telescopic Cantilever Rack
Read moreRated 0 out of 5















