Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
A motorized heavy-duty steel plate storage rack turns vertical space into powered storage bays for steel and aluminum plate. Herochu builds units from 3,000 x 1,500 mm to 12,000 x 2,500 mm with five or six tiers, 3,000 kg to 20,000 kg per tier, and remote-controlled drawer travel that works with overhead cranes and forklifts.
Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
A motorized heavy-duty steel plate storage rack turns vertical space into powered storage bays for steel and aluminum plate. Herochu builds units from 3,000 x 1,500 mm to 12,000 x 2,500 mm with five or six tiers, 3,000 kg to 20,000 kg per tier, and remote-controlled drawer travel that works with overhead cranes and forklifts.
What a plate warehouse needs from its racks
Four things decide whether a plate warehouse runs well: how fast a sheet can be retrieved, how much surface damage it collects, how much floor each tonne consumes, and whether the stock count can be trusted. Floor stacking scores badly on all four: retrieval depends on where the sheet landed, damage comes from dragging, and floor area disappears under access gaps.
Cantilever storage fixes the count and the access, but it needs working clearance at every level and puts sheet edges against steel arms. A powered magazine takes a different route: tiers hold material by grade, the drawer brings the pallet to the aisle, and the footprint grows upward instead of outward.
Four dimensions that set the layout
- Sheet envelope. 3,000 x 1,500 mm through 12,000 x 2,500 mm in the standard range. Use the largest sheet, not the average one.
- Drawer extension. The aisle must clear full travel plus working space. A 6 m platform needs a 6 m aisle ahead of it, and that aisle serves every tier in the bay.
- Rack height against hook height. Six tiers plus 120 mm clear space is a tall structure. Check crane hook height and the building eaves.
- Access side. Single-sided bays sit against a wall and use one aisle. Double-sided bays halve the aisle count but need space on both faces.
Where the layout allows it, running the bay parallel to the crane runway shortens bridge travel and keeps the hook over the aisle rather than over the rack.
Steel and aluminum in the same warehouse
Aluminum changes the arithmetic. At roughly 2,700 kg/m3 against steel at 7,850 kg/m3, a 3 mm aluminum sheet at 3,000 x 1,500 mm weighs about 36 kg, while the same sheet in steel weighs about 106 kg. A 3,000 kg tier therefore runs out of height long before it runs out of load when it holds aluminum, and clear space rather than tonnage becomes the design driver.
The deck matters more for aluminum too. Soft sheet marks easily, so a non-marking surface with separators prevents the scuffs that come from steel-on-steel contact, and dedicated tiers stop steel swarf and edge debris from transferring onto finished material.
How much storage one bay delivers
A six-tier bay at 3,000 kg holds 18 tonnes. The 6,000 mm model at 5,000 kg per tier holds 25 tonnes across five tiers. The 12,000 mm platform at 20,000 kg holds 100 tonnes.
The footprint of the 6,000 mm unit is roughly 6.3 m by 1.6 m, so about 10 m2 of floor carries 25 tonnes of plate. Reaching that tonnage with floor piles takes five stacks, each with its own access space.
Crane and forklift interface
Overhead cranes do the main work. The drawer extends into the aisle, the hook comes down on a stationary pallet, and the sheet lifts vertically. Because the drawer positions itself, the crane never pulls a load sideways, which is where most edge damage and most sling failures begin.
Forklifts handle smaller formats and pallet moves between bays, subject to fork length, aisle width and load centre. A 20,000 kg tier is crane territory.
Structure and floor
The frame is welded Q235B with a dual-beam crossbar under each pallet. The paired beams reduce mid-span deflection and spread narrow bundle loads, which matters most on the longest platform.
Floor conditions belong in the specification. Each foot delivers a point load, the travel path has to be flat enough for the guides, and anchors have to suit the slab rather than a default fixing. Herochu issues foundation loads with the general arrangement drawing.
Model range
| Model | Sheet size | Tiers | Load per tier | Warehouse role | | HC-B3015E-63 | 3,000 x 1,500 mm | 6 | 3,000 kg | Job shop blanks and stainless | | HC-B4015E-63 | 4,000 x 1,500 mm | 6 | 3,000 kg | Panel and enclosure production | | HC-B4020E-63 | 4,000 x 2,000 mm | 6 | 3,000 kg | Wide format, mixed grades | | HC-B6015E-65 | 6,000 x 1,500 mm | 5 | 5,000 kg | Service centre mill plate | | HC-B12025E-520 | 12,000 x 2,500 mm | 5 | 20,000 kg | Heavy fabrication and shipyards |
Herochu quotes tier count and load rating against the plate mix rather than a standard sheet size.
Throughput: where the minutes go
A retrieval has four steps: locate, extend, lift, retract. Only the lift involves the crane. A floor stack adds an unstacking loop, and a cantilever rack adds a threading manoeuvre.
Pre-extending the drawer while the crane is in transit takes the extension off the critical path. In a warehouse running thirty picks a shift, that is the difference between a crane that lifts and a crane that waits.
FAQ
Can one rack store both steel and aluminum? Yes. Aluminum goes on dedicated tiers with a non-marking deck and separators, steel on the remaining tiers, and clear space is set for the tallest stack rather than the heaviest.
How tall can a unit be built? Five or six tiers are standard and customizable. Final height follows tier count and clear space, checked against crane hook height before the drawing is released.
Does the drawer work with an overhead crane only? Overhead cranes are the main case, and forklifts cover smaller sheets and pallet moves. The drawer takes the horizontal travel, so the lifting device only works vertically.
Plan the aisle, then the rack
Plate storage is a layout decision before it is an equipment decision. Sheet envelope sets the bay, drawer extension sets the aisle, and tier count sets the height the crane has to serve. Herochu builds the rack around those three numbers, which is why a powered warehouse ends up with fewer aisles and more tonnes per square metre.
FAQ
Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!
Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.
Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.
Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.
Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.
Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.
Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.
Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.
Q8: How do you ensure product quality?
Our quality assurance includes:
A team of over 40 technical engineers for professional debugging and support.
A dedicated quality control department compliant with ISO9001 standards.
CE certification for all exports.
Rigorous load testing before shipment to ensure structural safety and reliability.
Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.
Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.
Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.
Customer visit
Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.
Factory
Hot Selling Machines
-
Heavy Duty Electric Drawer Plate Rack
Electric Drawer Roll Out Sheet Metal Rack
Read moreRated 0 out of 5 -
Motorized Sheet Metal Rack
Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Plate Magazine System with Drawer Design for Heavy Load Plate Handling
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
Read moreRated 0 out of 5 -
Gantry-Type Material Library
High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes
Read moreRated 0 out of 5 -
Gantry-Type Material Library
Gantry Automated Long Goods Storage System for Steel Profiles and Bar Stock
Read moreRated 0 out of 5 -
Gantry-Type Material Library
Gantry Automated Long Material Storage System for Steel Pipe, Bar and Profile Warehouse
Read moreRated 0 out of 5 -
Automated Pipe Material Storage Warehouse
Gantry Automated Storage and Retrieval System for a High-Density Steel Warehouse
Read moreRated 0 out of 5
Related products
-
Automated Pipe Storage Systems
Customized Automatic Storage Rack Unit Industrial Profile Steel Warehouse Systems
Read moreRated 0 out of 5 -
Pipe Storage Rack
Herochu Automatic Vertical Bars & Tubes Storage System – Precision, Power, and Space Efficiency for Modern Workshops
Read moreRated 0 out of 5
















