What length of pipe can a Herochu crank-out rack handle?

What length of pipe can a Herochu crank-out rack handle?
Standard configurations cover 6 m, 9 m, and 12 m material lengths, with custom dimensions available. The limiting factor is usually building clear height and crane hook height, not the rack itself.

Can one person operate a fully loaded tier?
Yes. The gear ratio and roller-bearing carriage are selected so a single operator can extend and retract a rated load without assistance. The crank effort stays within normal manual handling limits across the full travel.

Does the rack need a powered aisle or a special foundation?
No power is required for the mechanism. The rack anchors to a reinforced concrete slab; Herochu specifies anchor type and slab thickness based on the loaded weight per column and the building’s seismic category.

How does crank-out compare with a motorized roll-out system?
Manual crank-out avoids electrical infrastructure, controls maintenance, and lockout procedures. For bays where retrieval frequency is moderate and one operator manages several rack faces, manual operation is the lower-lifecycle-cost choice. Herochu offers both options, so the recommendation follows the duty cycle rather than a fixed product line.

Is a crank-out rack suitable for solid bar stock, or only pipe?
It suits both, but the compartment detail changes. Solid bar bundles need dividers or cradles to prevent spreading during carriage travel; pipe needs end stops and arm geometry that accommodate diameter range and overhang. Herochu specifies the two differently.

Customizable Heavy Duty Hand Crank Pipe Storage Rack
Customizable Heavy Duty Hand Crank Pipe Storage Rack

How much floor space does the crank-out mechanism actually save?
Savings depend on the aisle width required by the previous forklift operation and the number of rack faces served. In a typical bay where a counterbalanced forklift previously needed a 12-foot aisle, a crank-out installation can reduce the permanent aisle to a narrow operating zone and use the recovered area for additional rack or production equipment.

Can the rack be installed in phases?
Yes. Herochu’s modular column-and-carriage design allows a bay to start with fewer levels or a single-sided configuration and add tiers or convert to double-sided as inventory grows, provided the original column and foundation specification accounted for the future load.

What maintenance does the crank mechanism require?
The system is mechanical and maintenance-light: periodic inspection of roller bearings, rack-and-pinion engagement, guide rail alignment, and anchor torque. No hydraulic fluid, no electrical controls, no scheduled motor service. In dusty steel environments, keeping the guide rails clear of grit extends carriage life more than any other single action.

Customizable Heavy Duty Hand Crank Pipe Storage Rack
Customizable Heavy Duty Hand Crank Pipe Storage Rack

Share:

More Posts

Send Us A Message

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines

Factory

Factory
Factory
Factory
Factory
Factory

Customers

Sheet material storage Rack
customers2
honor
CONTACT US
Copyright @2025 Jinan Constant Storage Machinery Manufacturing Co., LTD    sitemap
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com