What is the difference between a motorized and a manual roll out sheet metal rack?

What is the difference between a motorized and a manual roll out sheet metal rack? A motorized rack extends its drawers under electric power from a remote and carries up to 20,000 kg per level on the largest platform. A manual rack uses a crank handle, typically with a ceiling around 5,000 kg per level, and needs the operator at the rack face during extension.

Can one person retrieve a sheet? Yes, for the storage step. One operator selects the tier, the drawer extends, and the crane lifts the sheet. The second person who would hold and guide a manual drawer is no longer needed.

What sheet sizes does it take? From 3,000 x 1,500 mm to 12,000 x 2,500 mm across five models, with five or six tiers and 120 mm clear space as standard.

Can one rack store both steel and aluminum? Yes. Aluminum goes on dedicated tiers with a non-marking deck and separators, steel on the remaining tiers, and clear space is set for the tallest stack rather than the heaviest.

How tall can a unit be built? Five or six tiers are standard and customizable. Final height follows tier count and clear space, checked against crane hook height before the drawing is released.

Does the drawer work with an overhead crane only? Overhead cranes are the main case, and forklifts cover smaller sheets and pallet moves. The drawer takes the horizontal travel, so the lifting device only works vertically.

What is the difference between an electric and a manual roll out plate drawer? The electric drawer carries more weight and extends under power, with travel on a remote. Herochu rates these tiers from 3,000 kg to 20,000 kg. A manual crank rack typically stops around 5,000 kg per level and needs an operator at the handle for every extension.

Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal

How long does one pick take? Drawer travel is up to 5.27 m/min, so a six metre drawer reaches full extension in a little over a minute while the crane is still approaching. The lift itself is unchanged.

Can the system work with a forklift instead of a crane? Yes, for sheets within the truck’s capacity and fork length. The drawer removes the horizontal pull, so the forklift only lifts and reverses.

How much can one tier hold? 3,000 kg on the HC-B3015E-63, HC-B4015E-63 and HC-B4020E-63, 5,000 kg on the HC-B6015E-65, and 20,000 kg on the HC-B12025E-520. A heavier rating changes the frame and the drive, not just the label.

Can steel, stainless and aluminum share one rack? Yes. Separation by tier keeps grades apart, and a non-marking deck protects soft aluminum and polished stainless from the scuffs that come with steel-on-steel contact.

Does the drawer need a crane to open? No. Drawer travel is electric and runs from a remote handset. The crane or forklift is only needed to lift the sheet off the deck.

How much floor space does it save? A six-tier bay holds six sheet piles in the footprint of one, plus a drawer extension zone. Against floor stacking, most of the gain shows up as clear aisle space and direct access rather than raw square metres.

Share:

More Posts

Send Us A Message

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines

Factory

Factory
Factory
Factory
Factory
Factory

Customers

Sheet material storage Rack
customers2
honor
CONTACT US
Copyright @2025 Jinan Constant Storage Machinery Manufacturing Co., LTD    sitemap
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com