What is a gantry automated long goods storage system? It is a storage and retrieval system that uses a rail-mounted gantry to travel along multi-level rack towers and deposit or extract material bins. The gantry moves in three axes—travel, lift, and fork engagement—and is controlled by a PLC with digital inventory management.
How does it compare with a honeycomb cassette warehouse? A honeycomb warehouse uses interchangeable cassettes and a cassette extraction mechanism; it can achieve high density and heights up to 30 m. A gantry tower uses a traveling gantry on floor rails and a shared picking aisle. The gantry approach suits mixed-length inventories where independent bin access is important.
What throughput can a gantry long-goods system achieve? Herochu specifies traveling speeds of 5–30 m/min and lifting speeds of 5–15 m/min, with ±2 mm repeatability. Throughput depends on the rack layout, the number of gantry units, and the retrieval sequence; these parameters are configured during system design.
Can the system handle both steel profiles and pipes in the same rack structure? Yes, provided the bin and rack layout is configured for the combined material mix. The HC-X series bins accommodate long and short materials and loose pieces, and the rack count and layer count are customized to the site.
What profile lengths can an automatic gantry storage system handle? Herochu’s HC-X series accommodates 6,000 mm, 7,000 mm, and 8,000 mm material across its standard models, with rack and bin layouts customized to the on-site length mix. The bin design allows long and short profiles to be stored in the same system.

How does a gantry system protect aluminum profiles from damage? The gantry engages the storage bin rather than the profile surface, eliminating direct fork-to-material contact during retrieval. Digital inventory management retrieves the specific bin requested without moving adjacent bundles, reducing unnecessary handling.
Can an aluminum profile warehouse achieve the same density gains as a steel pipe warehouse? The mechanism is the same: vertical storage in multi-level towers with a shared picking aisle. Actual density depends on ceiling height, profile length mix, and the proportion of short versus long material. The French aluminum profile case doubled stored volume within the same footprint after moving to automated gantry-served honeycomb storage.
What repeatability is required for profile handling? Herochu specifies ±2 mm repeatability on the HC-X series. For aluminum profiles, that tolerance supports clean bin engagement without the lateral contact that can mark anodized or painted surfaces.










