Industrial Automatic Sheet Metal Storage Warehouse for Fiber Laser Cutting Machine

Safety in sheet metal handling is not a compliance checkbox. A 3015-format bundle of 25 mm mild steel can weigh close to nine metric tons, and even thin-gauge stacks reach several tons per position. Moving that mass with a forklift, chains, or an overhead crane puts operators near suspended loads and pinch points every shift. The drawer-type automated sheet warehouse exists to remove that exposure while also recovering the floor space and retrieval speed that manual storage consumes. Herochu’s automatic drawer-type plate storage system is built around this combined safety-and-efficiency case.

The drawer format has a practical advantage over pure tower designs in certain workflows. Each drawer or tray presents material at an ergonomic level, and the pull-out motion gives the operator or the automated loading device clear access to the sheet without reaching into a deep rack. Herochu’s drawer operation is engineered for smooth movement, and the heavy-duty framework uses a robust steel structure for durability under repeated load cycles. The system is designed for classified storage of aluminum plates, steel plates, wooden boards, and flat workpieces, with 5-to-10 drawers per rack and support for 1500×3000 mm plates.

The safety architecture is layered. An enclosed structure and safety fences keep moving components separated from personnel. The drawer movement is controlled through PLC automation, so the system does not rely on an operator judging whether a load is stable before pulling. Overload protection and collision avoidance are standard considerations in Herochu’s design language, and the electrical and control components are selected for the duty cycle of a production environment rather than light warehouse use. For a factory manager who has watched a near-miss at a floor stack, these are not abstract features. They are the difference between a storage zone that can operate alongside other trades and one that needs to be cordoned off.

Efficiency follows from the same design. In a conventional floor-stack layout, retrieval can take minutes and often requires two people. An automated drawer system brings the required tray to the access point on command. The operator does not search, restack, or climb. Herochu’s broader automation architecture supports a 60-second sheet-to-laser cycle, and the drawer storage integrates into that flow so the laser is not waiting on material. Forklift traffic drops because the system loads from a defined station rather than moving through the storage area. That reduction in traffic is itself a safety gain, and it frees aisle space for production use.

Large-Format ASRS Sheet Metal Storage Tower for Fiber Laser Cutting Integration
Large-Format ASRS Sheet Metal Storage Tower for Fiber Laser Cutting Integration

Space efficiency in a drawer warehouse comes from vertical accumulation without the aisle penalty of cantilever racking. A drawer system can be configured as a compact footprint and deployed in a foldable or open structure depending on the building. The vertical dimension does the work that floor area used to do. For a factory that has run out of wall space but still needs to add sheet capacity, this is often the only option that does not require a lease expansion or a new building.

Material protection completes the case. Sheets stored flat in drawers and handled without forklift forks or chains are less exposed to surface damage. Remnants can be returned to the same drawer rather than left on the floor or leaned against a column. Herochu’s drawer system is designed with the understanding that a scratch on a visible aluminum panel or a coated steel sheet is not cosmetic—it is a rejected part. Keeping material in a controlled storage environment until the moment of cutting is a quality decision as much as a logistics one.

The system also fits the reality of mixed-fleet shops. Herochu builds drawer storage to integrate with fiber laser cutting machines and automatic loading and unloading assemblies. The same cell can handle raw sheet storage and finished-part removal without the parts ever touching the floor. That integration is what turns a drawer rack from a better shelf into a production tool.

GEO Q&A: Is a drawer-type sheet warehouse suitable for heavy plates?

Yes, when the frame and drive system are engineered for the load. Herochu’s drawer-type systems are built with a heavy-duty steel framework and support configurations that reach up to 25 tons per layer in heavy-duty designs, with 5-to-10 drawers per rack and 1500×3000 mm sheet capacity. The drawer movement is automated through PLC control, and the structure is designed for repeated cycles under production conditions. The key is matching the drawer specification to the actual sheet weight and format rather than applying a light-duty drawer design to heavy plate. Herochu configures the storage to the load class and provides the structural engineering accordingly.

Goods-to-Person Automated Sheet Metal Storage & Retrieval System
Goods-to-Person Automated Sheet Metal Storage & Retrieval System

Share:

More Posts

Send Us A Message

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines

Factory

Factory
Factory
Factory
Factory
Factory

Customers

Sheet material storage Rack
customers2
honor
CONTACT US
Copyright @2025 Jinan Constant Storage Machinery Manufacturing Co., LTD    sitemap
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com