Large-Format ASRS Sheet Metal Storage Tower for Fiber Laser Cutting Integration

A large-format ASRS sheet metal storage tower holds 3000 x 1500 mm blanks in powered vertical levels and delivers them to a fiber laser without manual lifting. Herochu builds these towers around servo-driven lift and extractor axes, vacuum loading, PLC control and automatic sheet separation, so the cutting program calls the next blank instead of an operator.A fiber laser can finish a nest of 3 mm mild steel in a few minutes, then stand idle while someone locates the next blank. That pause is not a machine fault. It is a material flow fault. Large sheets are awkward, heavy and easy to scratch, so every move needs a crane or forklift, two pairs of hands and a clear aisle. When twenty similar stacks sit on the floor, finding the right one takes longer than cutting it.

Large-Format ASRS Sheet Metal Storage Tower for Fiber Laser Cutting Integration

A large-format ASRS sheet metal storage tower holds 3000 x 1500 mm blanks in powered vertical levels and delivers them to a fiber laser without manual lifting. Herochu builds these towers around servo-driven lift and extractor axes, vacuum loading, PLC control and automatic sheet separation, so the cutting program calls the next blank instead of an operator.

Why manual blank handling caps laser throughput

A fiber laser can finish a nest of 3 mm mild steel in a few minutes, then stand idle while someone locates the next blank. That pause is not a machine fault. It is a material flow fault. Large sheets are awkward, heavy and easy to scratch, so every move needs a crane or forklift, two pairs of hands and a clear aisle. When twenty similar stacks sit on the floor, finding the right one takes longer than cutting it.

A storage tower removes that search. Sheets live in numbered vertical positions that the control can address directly, and the machine never waits for a forklift to cross the shop.

How does a large-format ASRS tower move a sheet to the laser?

The cycle is short and repeatable:

  1. The cutting program or warehouse system requests a material, thickness and sheet size.
  2. The PLC locates the drawer and the servo-driven extractor pulls it into the transfer aisle.
  3. A vacuum loading assembly lifts the top sheet while pneumatic nozzles inject air between the sheets to break the stack.
  4. A thickness sensor confirms that only one sheet has been picked.
  5. The sheet transfers onto the laser bed, and the empty drawer returns to its level.

Because servo axes drive each step, the sheet arrives in the same position every cycle. That consistency matters twice: nesting accuracy stays stable, and the cell can run a lights-out shift without anyone standing at the load side.

What does a six-level 3000 x 1500 mm tower include?

| Parameter | Specification | | Storage levels | 6 | | Maximum sheet size | 3000 x 1500 mm | | Load per level | 3000 kg | | Level height | 300 mm | | Lift and extractor drive | Servo | | Control | PLC with warehouse system interface | | Laser cell handling | Up to 800 kg loading and unloading | | Safety | Enclosed structure, safety fences, interlocks |

Six levels suits most mid-size fabrication cells. It holds a shift’s mix of mild steel, stainless and aluminium without turning the building into a warehouse, and the 300 mm level pitch keeps the stack compact enough to reach high without wasting headroom.

Why sheet separation and thickness measurement decide uptime

Two sheets picked as one is the most expensive fault in automated sheet handling. The laser cuts through the pair, focus shifts, the nozzle may crash and the lens can be gone. Pneumatic separation nozzles and a thickness check turn that risk into something the control catches before the sheet reaches the bed.

In practice this is the feature that decides whether a shop dares to run unattended. Without it, someone still stands at the tower at 2 a.m., watching the vacuum cup.

How much floor space does vertical storage return?

The tower uses height instead of aisle. Sheet stock that would spread across pallet racking and several hundred square metres of floor collapses into one enclosed column, and Herochu sizes the frame so a single footprint can hold up to ten times the sheet count of flat storage. The saving is not only rent. Shorter travel means the laser operator spends minutes at the machine rather than driving a forklift.

Where the building has a low door or the layout may change, a foldable open-frame version allows the tower to be moved without cutting it apart.

What keeps the structure stable and safe day to day?

Heavy-gauge steel columns carry the drawer loads, and chain drives with rollers move them with predictable wear rather than hydraulic drift. The working face is fenced and interlocked, so no one can reach into a moving level, and forklift access stays clear on the loading side.

That layout lets one person replenish a level in a single pass, which is how most shops refill during a shift change instead of stopping production.

Can one tower serve more than one laser?

Yes, provided the control knows the priority of each machine. A shared tower works best when the lasers cut from the same material family and the scheduling logic can hold a level for a job that starts within the hour. Where two machines run completely different stock, two smaller towers usually beat one large one, because each cell keeps its own buffer and neither waits on the other.

Questions shops ask before buying

Does the tower handle aluminium and stainless steel together? Yes. Each level is assigned to a material and thickness, and the control will not release a sheet that does not match the request. Keeping alloys in separate levels also avoids cross-contamination of offcuts.

What happens during a power failure? The extractor stops in a safe position and the level stays locked. Recovery is a controlled return to home, not a manual extraction.

How much maintenance does a tower need? Mainly chain tension checks, roller inspection and vacuum cup replacement. Herochu supplies the wear-part list with the machine so maintenance can be planned around production.

Choosing a configuration

Start with the sheet sizes you actually cut, not the largest size the machine can accept. Then count how many material and thickness combinations run in a week, because that number sets the level count far more reliably than tonnage does. Herochu configures level height, drawer count and the laser interface around that mix, so the tower buffers real jobs rather than catalogue numbers.

Get those two figures right and the tower stops being a storage purchase. It becomes the part of the cell that keeps the laser cutting.

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Customer visit

Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.

customers

Factory

Factory
Factory
Factory
Factory
Factory
customers2
honor

Hot Selling Machines

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com