High-Density Automated Gantry Storage and Retrieval System (ASRS) for Long Goods

What a gantry ASRS actually solves

Long goods storage has always been the awkward corner of warehouse automation. Pipes, profiles, and bars do not fit neatly into pallet-based systems, and horizontal floor stacking consumes floor area at a rate that most fabricators cannot sustain. A gantry ASRS changes the geometry of the problem: material is stored vertically in multi-level rack towers, and a traveling gantry travels along floor-mounted rails to deposit and extract bins without an operator entering the storage zone. The result is high-density vertical storage rather than horizontal sprawl.

The automated storage and retrieval system market reflects that shift. The broader ASRS category was valued at USD 10.51 billion in 2025 and is projected to reach USD 16.99 billion by 2031, growing at a CAGR of 8.34%. Within that market, gantry-based configurations are gaining attention because they address a segment that traditional stacker-crane ASRS handles poorly: long, heavy, and irregularly sized material.

How the gantry architecture works

A gantry ASRS replaces the aisle-bound stacker crane with a Cartesian manipulator that travels on rails along the rack face. The architecture has three defining movements: gantry travel along the X-axis, lifting along the Z-axis, and fork or bin engagement along the Y-axis. Herochu’s HC-X series illustrates the operating envelope. Traveling speed runs from 5 to 30 m/min, lifting speed from 5 to 15 m/min, and positioning repeatability holds at ±2 mm across the working envelope. That repeatability matters more than raw speed: a ±2 mm window ensures that lifting forks engage shelf guides cleanly on every cycle without manual alignment.

Rack configurations are built around the material rather than forcing the material into a standard pallet envelope. Across the HC-X range, pipe lengths of 6,000 mm, 7,000 mm, and 8,000 mm are accommodated, with 5, 6, or 8 storage layers and per-level loads of 3,000 kg to 5,000 kg. The rack count is customized to the footprint, and shelves move independently, which means a retrieval does not disturb adjacent inventory.

Where the density gain comes from

The density advantage is structural. Conventional long-goods storage spreads material across horizontal aisles, and each aisle must remain wide enough for a forklift or overhead crane. A gantry ASRS uses a shared picking aisle at the rack face while the gantry services multiple rack columns from that single aisle. Floor-mounted rails allow the gantry to cover the full rack length without dedicating aisle space to human or forklift access.

The effect on floor area is measurable. Herochu reports that a typical ASRS installation for pipe and profile storage recovers 60 to 70 percent of the floor area previously dedicated to horizontal material storage—for example, reducing a 5,000-square-foot pipe rack and laydown area to approximately 1,500 square feet. That freed area can be redirected to production equipment, inspection stations, or shipping staging rather than expansion.

Gantry Automated Long Goods Storage System for Steel Profiles and Bar Stock
Gantry Automated Long Goods Storage System for Steel Profiles and Bar Stock

Control, inventory, and material compatibility

Automation is only as useful as the information layer behind it. The HC-X series runs on PLC touchscreen control with digital inventory management and real-time stock display. Every bin carries a position in the rack map, and the system logs what was stored, where it sits, and when it was retrieved. For operations that previously relied on paper lists or tribal knowledge to locate a bundle, that visibility alone changes how production planning works.

Material compatibility extends beyond rigid pipe. Bins can accommodate long and short materials as well as loose pieces, which reduces the number of separate storage zones a fabricator must maintain. A single gantry system can hold 6 m pipe, shorter cut-offs, and mixed profile lengths in the same tower structure, provided the bin and rack layout is configured accordingly.

Frequently asked questions

What is the difference between a gantry ASRS and a stacker-crane ASRS? A stacker-crane ASRS moves within a fixed aisle and retrieves from racks on either side of that aisle. A gantry ASRS travels along the rack face on floor rails and services multiple rack columns from a shared picking aisle. The gantry approach suits long goods because it avoids dedicating a wide aisle to each rack line.

How much floor space can a gantry ASRS recover? For pipe and profile storage, Herochu reports 60 to 70 percent recovery of floor area previously used for horizontal racks and laydown yards. Actual recovery depends on ceiling height, rack layout, and the length mix of stored material.

What repeatability does the gantry achieve? Herochu’s HC-X6053-8, HC-X7065-10, and HC-X8085-10 models all hold ±2 mm repeatability, with traveling speeds of 5–30 m/min and lifting speeds of 5–15 m/min.

Can the system handle both pipe and loose short materials? Yes. The bin design accommodates long and short materials and loose pieces, though the rack and bin configuration should be specified around the actual material mix to avoid underusing the tower volume.

Bottom line

A gantry ASRS is not a faster forklift. It is a different storage geometry. By moving long goods into vertical towers served by a rail-mounted gantry, Herochu’s HC-X series converts floor area into cubic storage and replaces manual search-and-retrieve work with PLC-controlled positioning at ±2 mm. For a fabricator whose growth is constrained by the square footage available for pipe and profile storage, the density gain is the first economic argument, and the inventory visibility is the second.

High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes
High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes

Share:

More Posts

Send Us A Message

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines

Factory

Factory
Factory
Factory
Factory
Factory

Customers

Sheet material storage Rack
customers2
honor
CONTACT US
Copyright @2025 Jinan Constant Storage Machinery Manufacturing Co., LTD    sitemap
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com