Questions shops ask about WMS-linked sheet storage
Does it replace our ERP? No. The tower control and WMS handle physical movement and short-horizon scheduling. The ERP keeps commercial stock and purchasing.
Can we keep manual override? Yes. Operators retain manual control for maintenance and exception handling, with the action logged so stock stays consistent.
What about audit and traceability? Every pick, return and consumption is recorded against a material code and job, which supports customer audits without a separate paperwork trail.
Does the tower handle aluminium and stainless steel together? Yes. Each level is assigned to a material and thickness, and the control will not release a sheet that does not match the request. Keeping alloys in separate levels also avoids cross-contamination of offcuts.
What happens during a power failure? The extractor stops in a safe position and the level stays locked. Recovery is a controlled return to home, not a manual extraction.
How much maintenance does a tower need? Mainly chain tension checks, roller inspection and vacuum cup replacement. Herochu supplies the wear-part list with the machine so maintenance can be planned around production.
Can the tower feed a laser and a punching machine? Yes, if the control can prioritise. Shared access works when both machines cut the same material families.

What sheet size can it hold? The standard configuration handles 3000 x 1500 mm sheets at 3000 kg per level, with 300 mm level height. Other sizes are configured to the shop’s cutting list.
How is the tower loaded? By forklift on the loading face, drawer by drawer. A full level change takes one pass, so replenishment fits into a shift change.
How fast is retrieval? The drawer arrives in the time the drive needs to travel to the level and extract. For most cells this is a fraction of the time a forklift takes to reach a rack, but the real gain is that no one leaves the machine.
Do we need a WMS? No, but it helps. The tower can run from its own classification logic; a warehouse system adds job reservation and stock accuracy.
What about very thick plate? Thickness changes the drawer and drive specification. Herochu rates each configuration against the actual plate list rather than a single headline capacity.
Can it be extended later? Levels and racks can be added if the structure and the building allow it. Plan the height at the start, because that is the part that is hard to change.










