High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes

A high-density gantry ASRS stores profiles and tubes in eight-level racks served by one rail-mounted gantry, replacing four or five forklift aisles with a single access path. The result is roughly a third more storage positions on the same floor, with every position tracked in real time.Density is a word that gets used loosely in warehouse planning. It should mean one thing: storage positions per square metre of floor, counted with the aisles that serve them. On that measure, a long goods warehouse run on forklifts and cantilever rack is usually a half-empty building with a lot of steel in it.

High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes

A high-density gantry ASRS stores profiles and tubes in eight-level racks served by one rail-mounted gantry, replacing four or five forklift aisles with a single access path. The result is roughly a third more storage positions on the same floor, with every position tracked in real time.

Density is a word that gets used loosely in warehouse planning. It should mean one thing: storage positions per square metre of floor, counted with the aisles that serve them. On that measure, a long goods warehouse run on forklifts and cantilever rack is usually a half-empty building with a lot of steel in it.

How many positions fit into a given floor area?

In a Herochu layout, plan on a tower of ten racks at eight levels, or 80 positions, in a footprint of about 36 m by 12 m including the gantry aisle, which is roughly 430 m². A four-high cantilever layout holding the same 80 positions needs about 700 m² once five forklift aisles are counted. These are planning figures from typical layouts, not a guarantee; row count, load length and building width move them by 10 to 15%.

The comparison belongs in the business case next to rent or the cost of an extension. In a leased building the saving is rent. In an owned building it is the extension that no longer has to be built.

Where exactly does the density come from?

Three levers, and they compound:

Aisle consolidation. One gantry aisle replaces four to five forklift aisles.

Vertical stacking. Five to eight levels instead of three or four, using height a forklift cannot reach safely with a 6 m load.

Shelf independence. Only the requested shelf is served, so a tower can be packed without blocking access to the material behind it, which is the problem that forces empty space into conventional racking.

Take any one away and the case weakens. Height without aisle consolidation is a tall rack. Aisles without height is a forklift warehouse with extra steel.

Can one tower serve profiles and tubes together?

Yes, and this is where the layout earns its keep in a mixed service centre. Racks are allocated by product family at commissioning, but the allocation is a software address rather than a welded bracket. A rack set up for 6 m tube can be re-divided for angle or flat bar in an afternoon.

Two constraints stay physical. The fork or bin has to suit the load, and the level rating has to cover the heaviest bundle that will ever be placed there. Herochu configures bin type per rack during design, which is cheaper than converting later.

What does real-time inventory change in daily work?

Stock accuracy is usually the second benefit management notices, after floor space. When every position is booked at the moment of storage, the screen and the physical bay agree, and a promise date stops depending on someone walking the aisle.

Three habits make it stick: book the remnant as well as the bundle, block a position when material is allocated to an order, and reconcile the screen against a physical count monthly rather than annually. A system that is trusted is used. One that is corrected once a year gets bypassed.

How do you expand without stopping the warehouse?

Herochu designs the rail run longer than phase one, keeps the gantry stroke above the current rack count, and leaves the far end of the bay clear for the next module. Additional racks then go in over a weekend, with the gantry re-referenced afterwards.

This is the reason to settle the expansion plan before the first drawing is issued. A tower bought for 80 positions and grown to 120 costs far less than two towers bought separately, and the second phase does not interrupt the first.

What belongs in the RFQ?

Six items decide the price and the layout: the length range of the longest and shortest product, the heaviest bundle and its dimensions, moves per shift and the peak hour, available height under the eaves, slab condition and rail line, and the power supply. Add the interface question, standalone PLC or WMS, and the control philosophy is settled.

Herochu works from these six numbers; a site that sends a stock list instead usually gets a layout that fits the list and not the building.

How is the investment judged?

Judge it on four lines: floor area released, labour hours removed from put-away and picking, damage and re-work avoided, and the stock accuracy that shortens order lead time. Price per position is a poor measure on its own, because density is the product.

Herochu quotes the layout, the machine and the commissioning as one package, and runs the position count against a customer’s own stock file before a layout is issued. That check usually changes the rack plan, and it is cheaper to change a drawing than a building.

Standard configurations

Model

Product length

Levels

Max. load per level

Racks

HC-X6053-8

6,000 mm

5

3,000 kg

8

HC-X7065-10

7,000 mm

6

5,000 kg

10

HC-X8085-10

8,000 mm

8

5,000 kg

10

Frequently asked questions

How much floor does a high-density gantry ASRS save?

About 25 to 35% compared with a four-high cantilever layout served by forklifts, for the same number of storage positions.

Can it handle both 6 m tube and longer profiles?

The standard range covers 6,000, 7,000 and 8,000 mm, with rail and rack length customized to the longest product the site expects to stock.

What building height is needed?

Roughly 10 to 11 m under the eaves for an eight-level tower. Fewer levels reduce the requirement in steps of about 1.1 m.

Is a WMS mandatory?

No. The PLC holds position-level inventory and runs standalone; a WMS or ERP link is optional and typically added when order allocation moves to the ERP.

How many moves per hour does one gantry deliver?

About 35 to 40 single-command cycles, which is the figure to use when sizing the number of gantries against peak shift demand.

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Customer visit

Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.

customers

Factory

Factory
Factory
Factory
Factory
Factory
customers2
honor

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com