Gantry Automated Long Material Storage System for Steel Pipe, Bar and Profile Warehouse

A gantry automated long material storage system holds pipe, bar and profile in the same multi-level tower, with bins sized for banded bundles and loose cut-offs. One rail-mounted gantry serves every shelf, so a mixed stock range no longer needs one rack family and one aisle per product type.A warehouse that sells pipe by the metre, bar by the bundle and profile by the length is never short of stock types. It runs short of racking types. Every family wants its own cantilever row, every row wants an aisle, and the aisles multiply faster than the sales. The gantry answer is to stop treating storage as a horizontal problem.

Gantry Automated Long Material Storage System for Steel Pipe, Bar and Profile Warehouse

A gantry automated long material storage system holds pipe, bar and profile in the same multi-level tower, with bins sized for banded bundles and loose cut-offs. One rail-mounted gantry serves every shelf, so a mixed stock range no longer needs one rack family and one aisle per product type.

A warehouse that sells pipe by the metre, bar by the bundle and profile by the length is never short of stock types. It runs short of racking types. Every family wants its own cantilever row, every row wants an aisle, and the aisles multiply faster than the sales. The gantry answer is to stop treating storage as a horizontal problem.

What does long material cover in one tower?

Six to eight metres is the working range: welded and drawn pipe, round and square bar, angle, channel, flat bar and small sections. Bundles arrive banded, and the same bay usually has to absorb short off-cuts, sample lengths and returns from the saw.

The design answer is a shelf not tied to one product: a steel deck with adjustable dividers and a raised lip. Divider positions are set during layout and moved later with hand tools. Pipe sits in cradles, profiles between pegs, and short material in a tray at the end of the level.

Why does mixed stock break conventional racking?

Cantilever racking is efficient when one row holds one section family and the forklift can approach from both sides. Add a second family and the row has to be split, or a second row built with its own aisle. Most steel service centres end up with four or five rack types and a circulation network that grows faster than the stock.

A tower inverts the constraint. Storage is vertical and the access path is shared, so adding a product family means re-dividing a shelf, not building an aisle. In a Herochu tower the building stops setting the stock range; the division plan does.

How are short and loose pieces handled?

They are the usual reason a manual warehouse looks tidy in the layout drawing and chaotic in reality. Loose off-cuts get stacked on the floor, then buried. In a gantry tower each level can carry a lidded tray or a divided bin with a 60 to 80 mm lip, sized to the shortest length the site actually keeps.

Two rules keep it workable. The tray has to be liftable by the same fork as a bundle, and it needs an address. Material without an address becomes invisible stock.

How many storage positions does the warehouse need?

Count bundles, not tonnes. Take the number of active stock lines, multiply by the average number of bundles per line, then add an allowance for work in progress at the saw. A service centre holding 60 active pipe sizes at five bundles each, plus 20% for WIP, needs roughly 360 positions.

The model table then does the arithmetic. HC-X8085-10 offers ten racks at eight levels, or 80 positions; four such towers, or a longer rail run with more racks, covers the requirement. Herochu sizes the rail length against the expansion plan so racks can be added at the far end without moving the gantry.

What cycle time should you expect?

Travel dominates. A 20 m run at 25 m/min takes about 48 seconds each way, a 4 m lift at 10 m/min about 24 seconds, and fork or bin transfer adds 15 to 20 seconds. A single-command cycle therefore lands near 90 seconds, which is roughly 35 to 40 moves per hour with realistic pauses.

A trained forklift operator with a clear aisle can beat that on a short move, but loses on every move that needs stock searching, a cleared path or a crane. Where the duty needs 60 moves an hour, the answer is a second gantry, not a higher travel speed.

How is pipe surface protected?

Pipe is usually the product most sensitive to handling marks, and galvanized tube and coated line pipe show every chain and fork contact. Three details do most of the work: cradle blocks shaped to the diameter so the load cannot roll, polyurethane pads on the fork faces, and a lift-and-place motion instead of a push. The Herochu gantry never drags a bundle across a shelf.

For stainless and cold-drawn bar the logic extends to the bins: no bare steel contact at the ends, and dividers that stop bundles rubbing.

What changes when the product mix changes?

On a Herochu tower the rails can be extended, rack modules added, a level inserted where the pitch allows, and dividers re-set on any shelf. The gantry itself only needs replacing if the new load exceeds its rating or the new length exceeds its stroke.

That is the practical test of a layout. Ask what happens if the biggest seller next year is a section the warehouse does not stock today. If the answer involves a new aisle, the design is rigid. If it involves a software address and a moved divider, it is not.

Standard configurations

Model

Pipe length

Levels

Max. load per level

Racks

HC-X6053-8

6,000 mm

5

3,000 kg

8

HC-X7065-10

7,000 mm

6

5,000 kg

10

HC-X8085-10

8,000 mm

8

5,000 kg

10

Frequently asked questions

Can one gantry system store pipe and profiles together?

Yes. Levels are fitted with cradles, pegs or bins according to the product assigned to them, and each position carries its own load limit in the control.

What pipe lengths are covered?

6,000, 7,000 and 8,000 mm in the standard builds, with rack and rail length customized to the site.

How many moves per hour can one gantry make?

About 35 to 40 single-command cycles, based on a 20 m travel distance and an average lift of four levels.

Does it handle loose off-cuts?

Trays and divided bins on the same levels take short and loose material, provided each bin is booked to a position like any bundle.

What about very heavy bundles?

The 7,000 mm and 8,000 mm models are rated at 5,000 kg per level. Bundle weight and overhang should be confirmed per position during layout.

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Customer visit

Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.

customers

Factory

Factory
Factory
Factory
Factory
Factory
customers2
honor

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com