Customizable Electric Cantilever Storage System for Heavy Pipes & Profiles

A customizable electric cantilever storage system is built around the customer’s pipe schedule rather than a fixed catalogue size. Herochu customises arm rating, extension length, layer count, tier clear space, column height and pipe length, then verifies the design against bundle weight, crane height and floor loading before manufacture.

What customization covers on this rack

“Customizable” is often a brochure word with nothing behind it. On a cantilever storage system there are seven variables that genuinely change the steel, and each one is set from data the customer already has.

VariableStandard settingRange offered by HerochuWhat drives the choice
Arm load ratingBy model0.5 t / 1.0 t / 2.0 t / 3.0 t per arm (manual); up to 8 t per level (electric)Heaviest bundle plus sling and spreader
Cantilever extension1.0–3.0 mUp to 100% of stroke, fully extendedBundle width and how far the crane hook must reach
Number of layers5 on 6 m models, 6 on 9 m and 12 m models2–6, or more on requestNumber of material types in daily circulation
Tier clear space700 mmCustomised per tierTallest profile in the load, plus sling clearance
Pipe length6,000 / 9,000 / 12,000 mm3 m to 12 m and beyondLongest stock, including 20 ft and 40 ft arrivals
Column height2.0–6.0 mCustomisedCrane hook height above the top tier
OperationElectric driveElectric, or hand crank on manual versionsTurnover rate and bundle weight

Each row changes the column section, arm wall thickness or base plate, which is why the design conversation belongs before the purchase order.

The four inputs that set the design

1. The pipe schedule. A rack specified around a 6 m average will be asked to hold 9 m material within a year, at an angle, over the aisle. Give diameter, wall thickness, shape and maximum length.

2. Bundle weight with lifting gear. A tier rated 5,000 kg carries the bundle plus sling, spreader and end protection, and it carries them when the load lands slightly off-centre — which is normal in a real lift.

3. Throughput at each tier. A tier used twice a week can sit high and be reached with a long sling. One used twenty times a shift belongs at chest height, where the crane cycle is shortest.

4. The building. Hook height, column grid, obstructions, slab strength at the footplates and crane travel routes all constrain geometry. Herochu asks for this at quotation stage: a rack that fits the pipes but not the building is not a solution.

Motorized Cantilever Telescopic Pipe Material Rack for Tubes, Pipes & Profiles
Motorized Cantilever Telescopic Pipe Material Rack for Tubes, Pipes & Profiles

Where the frame earns its rating

Columns are welded Q235B high-strength steel, with the base section sized for the bending moment of a fully loaded, fully extended arm — the worst case, not the average. A dual-beam crossbar ties the column faces so an off-centre set-down does not twist the arm assembly. Independent compartments on both sides of the column give classification storage without a second structure.

The carriage runs at 27 mm/s: a full extend-and-retract inside one crane cycle, with enough control at the end of travel to place a bundle without impact. Extension and height run from a pendant, so nobody stands inside the rack to position an arm.

Standard model or custom build?

The standard range covers most plants:

  • HC-G6055SE / HC-G6055E — 6,000 mm stock, 5,000 kg per level, five tiers
  • HC-G9068E — 9,000 mm stock, 8,000 kg per level, six tiers
  • HC-G12068E — 12,000 mm stock, 8,000 kg per level, six tiers

A custom build wins in four cases: stock outside 6–12 m, a pipe mix needing more than six layers, a building that limits column height, or bundle weights close enough to the tier limit that arm spacing has to be calculated rather than assumed.

Customizable Motorized Telescopic Cantilever Rack for Long Goods
Customizable Motorized Telescopic Cantilever Rack for Long Goods

What the factory needs to be able to do

Custom geometry only works if the manufacturer can change it in-house. Herochu runs a 20,000 m² factory with a 300-person team, producing columns, arms, carriage and drive as one system to ISO 9001 with CE marking on the drives, so a change to tier clear space is a drawing revision in the same plant rather than a third-party renegotiation.

That gives buyers three checks: whether the rating is per level or per arm (they are not interchangeable), whether extension is stroke or maximum reach, and whether certification covers the drive as supplied.

Installation and commissioning

Footplates are levelled on the prepared slab, columns plumbed and tied, arms fitted and locked, then the drive commissioned with the pendant tested through a full stroke at rated load. At handover, confirm arm locks are engaged on every tier in use and that the crane operator has been shown the full-extension position — that is where the system’s advantage sits, and where an untrained operator will not think to work.

Cost drivers, without the guesswork

Four variables move the price: rated tonnage (arm rating multiplied by tiers and bays), extension length, column height and drive specification. Pipe length matters less than expected, because a 12 m rack is largely a 6 m rack with longer arms and a wider base.

The counterweight is floor area. Herochu’s comparison for 6 m pipe puts a vertical rack at roughly 20 m² of footprint against about 100 m² for floor stacking with an aisle, so the released space is usually the largest line in the business case.

Customizable Electric Cantilever Storage System for Heavy Pipes & Profiles
Customizable Electric Cantilever Storage System for Heavy Pipes & Profiles

Share:

More Posts

Send Us A Message

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines

Factory

Factory
Factory
Factory
Factory
Factory

Customers

Sheet material storage Rack
customers2
honor
CONTACT US
Copyright @2025 Jinan Constant Storage Machinery Manufacturing Co., LTD    sitemap
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com