Crank-Out Roll-Out Cantilever Rack Designed for Storing Long Material

A roll-out cantilever rack keeps long material in receptacles that crank out into the aisle for overhead lifting. Arms reach 100% extension, so the crane works in open air instead of inside a pocket. Herochu builds the system in modular frames up to eight levels and about 20 ft high.

Crank-Out Roll-Out Cantilever Rack Designed for Storing Long Material

What counts as long material?

The rack does not care what a profile is called. It cares about length, weight and how the load behaves once it is off the ground.

Bar stock in mill lengths, bundled or loose

Pipe, tube and hollow sections

Extruded aluminium, brass and polymer profiles

Dies, fixtures and mould bases arriving on skids

Rolls, mandrels and aerospace components in cradles

How does a roll-out rack use height that floor storage wastes?

A floor stack stops near shoulder height because everything above it has to be climbed. That leaves most of the building unused and pushes a store outward instead of upward. A roll-out rack takes the same material to about 20 ft in receptacles served by crane, so the cube above forklift reach becomes working storage.

Density comes from three effects: vertical stacking to eight levels, one aisle serving both faces of a double-sided frame, and no turning circles for a forklift. Plants moving off floor stacks report as much as five times the storage capacity on the same footprint.

What does each storage approach do with the same height?

Height, aisle and protection compared

Approach

Height used

Aisle demand

Load protection

Capacity trend

Floor stack

Reach height, then a climbing risk

Turning circles for the truck

Bottom bundle carries the pile

Flat

Static cantilever

Up to the hook, by reaching in

One aisle per rack face

Better, but drag marks remain

Moderate

Roll-out cantilever

About 20 ft across eight levels

One aisle serves both faces

Bundle stays supported and separated

Up to five times floor storage

The last column follows from the other three. Take away the climbing limit, the second aisle and the pile load, and the same floor area holds more steel.

Why does bundle integrity matter for valuable stock?

Long material is rarely cheap at the top end: anodized extrusion, honed tube, titanium bar, a die base that took weeks to machine. Dragging any of those across an arm leaves a mark no finishing operation recovers, and the mark usually appears on the piece that was cut last.

Because a receptacle carries the whole bundle and the crane lifts vertically, contact is limited to the sling and the arm pad. Support trays stop small sections spreading, dividers keep SKUs apart, and liners handle the surfaces that cannot take a scratch.

One unit or a plant-wide system?

A single unit is often the right start. It proves the workflow on one material family before capital goes into a full store, and it fits against a wall where a forklift could never turn. Herochu builds it on the same frame and drive as a full store, so the first bay is not thrown away when the second arrives.

A plant-wide system is a different exercise. Frames are modular, with control panels, grid supports and connecting shafts that adapt to almost any long heavy load, so bays can be added as the product mix changes. Installation is phased around production instead of being crammed into a shutdown.

Which layout checks decide the number of units?

Picks per shift, and how many of them pull the same bundle.

Hook coverage: which bays the crane reaches with a sling attached.

Longest piece, because it sets aisle length rather than rack length.

Whether trucks deliver to the bay or to a receiving door.

Where the store grows next, so foundations and aisle width are reserved now.

Where does roll-out storage go beyond metal?

Metalworking plants are the main users, but the same receptacle holds anything long, heavy and awkward: dies and fixtures on skids, paper or film rolls, composite stringers, aerospace assemblies in cradles. The limit is the load case, not the industry. A frame engineered for bundled pipe will not automatically suit a machined assembly, and Herochu sizes the receptacle, pads and drive to whatever the load actually is.

FAQ

Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!

Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.

Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.

Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.

Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.

Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.

Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.

Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.

Q8: How do you ensure product quality?
Our quality assurance includes:

  • A team of over 40 technical engineers for professional debugging and support.

  • A dedicated quality control department compliant with ISO9001 standards.

  • CE certification for all exports.

  • Rigorous load testing before shipment to ensure structural safety and reliability.

Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.

Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.

Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.

Customer visit

Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.

customers

Factory

Factory
Factory
Factory
Factory
Factory
customers2
honor

Product Categories

Roll Out Sheet Metal Rack
Roll Out Sheet Metal Rack
Pipe Cantilever Storage Rack
Pipe Cantilever Storage Rack
Sheet Metal Handling Equipment
Sheet Metal Handling Equipment
Automated Sheet Metal Storage Systems
Automated Sheet Metal Storage Systems
Automatic loading and unloading system for laser cutting machines
Automatic loading and unloading system for laser cutting machines
Scroll to Top

✶ ✶ ✶ Get a quote !Email:herochu@sdconstantstorage.com