Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
A customizable electric magazine rack stores steel plate and sheet metal in separate powered tiers instead of one floor stack. Herochu sizes each unit around the sheet dimensions, thickness range and load mix a plant actually runs, then sets tier count, clear height, deck surface and controls to match. Capacity runs from 3,000 kg to 20,000 kg per tier depending on model.
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
A customizable electric magazine rack stores steel plate and sheet metal in separate powered tiers instead of one floor stack. Herochu sizes each unit around the sheet dimensions, thickness range and load mix a plant actually runs, then sets tier count, clear height, deck surface and controls to match. Capacity runs from 3,000 kg to 20,000 kg per tier depending on model.
What does customization cover on a plate magazine?
Most catalogue racks arrive with a fixed envelope and the buyer bends the workflow around it. A plate magazine is worth customizing because five variables decide whether the unit still works in year five.
- Sheet envelope. From 3,000 x 1,500 mm for a shop cutting blanks, up to 12,000 x 2,500 mm for heavy plate.
- Tier count. Six tiers on the 3,000 and 4,000 mm models, five on the 6,000 and 12,000 mm platforms, both adjustable at order.
- Clear space. 120 mm is the standard gap between tiers. It grows when bundles, lifting clamps or suction frames need headroom.
- Load per tier. 3,000 kg on the smaller models, 5,000 kg on the 6,000 mm unit, 20,000 kg on the 12,000 mm platform.
- Deck and controls. Steel or timber decking, a non-marking surface for aluminum, remote handset or fixed pendant.
Customization that stops at paint colour is not engineering. The question is whether 2,400 mm plate and 1,200 mm offcuts should share a tier that fits neither.
Why classified storage beats a floor stack
A pile of 6 mm plate at 3,000 x 1,500 mm weighs about 212 kg per sheet, so forty sheets is 8.5 tonnes sitting on the slab. The sheet a press brake needs next is usually near the bottom. Getting it out means lifting the top half with a magnet, dragging steel across steel, and hoping the edges survive.
Separate compartments change that sequence. Each grade and thickness sits in its own tier, the operator reads the stock from the aisle, and retrieval touches one pile instead of five. Bent corners and the double handling that comes with restacking drop away, and load spreads across the base frame instead of concentrating under one stack.
How the electric drive changes a shift
The operator selects a tier on the remote. The drawer travels out on its own drive at 2.28 to 5.27 m/min depending on model, stops with the deck clear of the frame, and the crane or forklift lifts from open access.
The effect is largest on long plate. Winding a 6 m drawer out by hand takes effort, and the operator ends up inside the load path to check alignment. With powered travel, one person runs the cell from a safe position, and the crane spends its hook time lifting rather than repositioning.
What actually carries 20 tonnes
The frame is welded Q235B, and every pallet sits on a dual-beam crossbar rather than a single member. Two beams split the span, so plate deflects less in the middle and a narrow bundle cannot place all its weight on one line. Load moves from sheet to pallet, pallet to crossbars, crossbars into the side frames, then through the base to the slab.
That is why the slab survey matters as much as the rack drawing. Point loads at each foot, floor flatness along the travel path and anchor condition decide whether the unit runs cleanly for a decade.
Model range and capacity
| Model | Sheet size | Tiers | Load per tier | Typical material | | HC-B3015E-63 | 3,000 x 1,500 mm | 6 | 3,000 kg | Laser and plasma blanks, stainless sheet | | HC-B4015E-63 | 4,000 x 1,500 mm | 6 | 3,000 kg | 4 m plate for panel and enclosure work | | HC-B4020E-63 | 4,000 x 2,000 mm | 6 | 3,000 kg | Wide plate, mixed grade storage | | HC-B6015E-65 | 6,000 x 1,500 mm | 5 | 5,000 kg | Service centre stock, 6 m mill plate | | HC-B12025E-520 | 12,000 x 2,500 mm | 5 | 20,000 kg | Heavy fabrication, shipyard plate |
Clear space is 120 mm as standard and customizable. Discharge uses electric assistance, and every model works with overhead cranes and forklifts.
Which platform fits which operation
The 3,000 and 4,000 mm models suit job shops. The 6,000 mm unit is the service centre workhorse, and the 12,000 mm platform handles plate measured in tonnes per sheet.
How Herochu configures a unit
Herochu starts with a load schedule: sheet sizes, thickness bands, weight per tier, handling attachment, crane capacity and available aisle. The build then fixes tier count, clear space, deck surface and control position, and issues a general arrangement drawing with drawer extension and foundation loads. Tier count is quoted against that schedule, not against a catalogue page.
FAQ
How much can one tier hold? 3,000 kg on the HC-B3015E-63, HC-B4015E-63 and HC-B4020E-63, 5,000 kg on the HC-B6015E-65, and 20,000 kg on the HC-B12025E-520. A heavier rating changes the frame and the drive, not just the label.
Can steel, stainless and aluminum share one rack? Yes. Separation by tier keeps grades apart, and a non-marking deck protects soft aluminum and polished stainless from the scuffs that come with steel-on-steel contact.
Does the drawer need a crane to open? No. Drawer travel is electric and runs from a remote handset. The crane or forklift is only needed to lift the sheet off the deck.
How much floor space does it save? A six-tier bay holds six sheet piles in the footprint of one, plus a drawer extension zone. Against floor stacking, most of the gain shows up as clear aisle space and direct access rather than raw square metres.
Customization is the specification
A magazine rack is only as useful as its fit to the material going into it. Sheet envelope, tier count, clear space and deck surface decide whether operators use the system or work around it. Herochu builds to those numbers, so the rack arrives matching the plate it was ordered for.
FAQ
Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!
Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.
Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.
Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.
Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.
Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.
Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.
Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.
Q8: How do you ensure product quality?
Our quality assurance includes:
A team of over 40 technical engineers for professional debugging and support.
A dedicated quality control department compliant with ISO9001 standards.
CE certification for all exports.
Rigorous load testing before shipment to ensure structural safety and reliability.
Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.
Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.
Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.
Customer visit
Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.
Factory
Hot Selling Machines
-
Heavy Duty Electric Drawer Plate Rack
Electric Drawer Roll Out Sheet Metal Rack
Read moreRated 0 out of 5 -
Motorized Sheet Metal Rack
Motorized Heavy-Duty Steel Plate Storage Warehouse Rack for Steel and Aluminum
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Electric Plate Magazine System with Drawer Design for Heavy Load Plate Handling
Read moreRated 0 out of 5 -
Heavy Duty Electric Drawer Plate Rack
Customizable Electric Magazine Rack for Steel Plate and Sheet Metal
Read moreRated 0 out of 5 -
Gantry-Type Material Library
High-Density Gantry ASRS Long Goods Storage System for Steel Profiles and Pipe Tubes
Read moreRated 0 out of 5 -
Gantry-Type Material Library
Gantry Automated Long Goods Storage System for Steel Profiles and Bar Stock
Read moreRated 0 out of 5 -
Gantry-Type Material Library
Gantry Automated Long Material Storage System for Steel Pipe, Bar and Profile Warehouse
Read moreRated 0 out of 5 -
Automated Pipe Material Storage Warehouse
Gantry Automated Storage and Retrieval System for a High-Density Steel Warehouse
Read moreRated 0 out of 5
Related products
-
Automated Pipe Storage Systems
Customized Automatic Storage Rack Unit Industrial Profile Steel Warehouse Systems
Read moreRated 0 out of 5 -
Pipe Storage Rack
Herochu Automatic Vertical Bars & Tubes Storage System – Precision, Power, and Space Efficiency for Modern Workshops
Read moreRated 0 out of 5
















