Vertical Scrap & Remnant Rack for Metal Workshops

Every metal workshop has a scrap corner. It is where cut-offs, partial plates, leftover blanks, and off-spec remnants accumulate until someone clears them out — usually to the scrap bin, often before their usable life is over. The cost is not just the material wasted; it is the time spent sorting, the floor space lost, and the safety hazard of unstable piles. Herochu’s vertical scrap & remnant rack replaces that corner with structured, retrievable storage that keeps remnants usable and the workshop floor clear.

Turning Scrap Back Into Stock

The distinction between scrap and remnant is mostly a matter of organization. A piece of 6 mm mild steel plate, 400 × 300 mm, is scrap when it is buried under a shifting pile and forgotten. The same piece is stock when it sits in a labeled drawer, sorted by thickness and grade, visible to anyone walking past. Herochu’s vertical rack architecture makes that distinction operational.

Remnants stored on edge in tiered drawers stay sorted. Each drawer is a defined slot for a material type — stainless drops in one, aluminum offcuts in another, mild steel remnants in a third. When a job needs a small piece, the operator pulls the right drawer instead of cutting from prime stock. Scrap generation slows, and material utilization rises without any change to the cutting process itself.

Workshop Safety and Floor Discipline

Unmanaged scrap piles are a safety problem. Sheets leaning against walls slide without warning. Flat stacks placed on the floor create trip hazards and forklift obstructions. Workers lifting heavy top sheets to reach a specific remnant risk back strain and dropped-load injuries. These are the routine, unreported costs of poor remnant storage.

Herochu’s vertical rack addresses them structurally. Sheets stand on edge inside enclosed drawer channels, eliminating the lean-and-slide hazard. The rack’s footprint is compact enough to sit against a wall or beside a machine without consuming aisle space. Mechanical assistance in the drawer mechanism means a single operator can extend a fully loaded drawer without strain, even at the 1000 kg per-level capacity of the standard models. Non-skid strips on drawer surfaces keep sheets from shifting during extension.

Robust Construction for Industrial Service

A scrap & remnant rack in a working workshop takes abuse — forklift bumps, dropped tools, weld spatter, coolant spray. Herochu builds for that environment. The frame is high-strength carbon steel, CNC-machined for dimensional accuracy on assembly. Components receive electrostatic powder coating for corrosion and wear resistance, holding up against the moisture and metal dust typical of fabrication floors.

The drawer track system is engineered for repeated cycling under load. Guided tracks keep drawers aligned through full extension, and the mechanical assistance mechanism is sized for the rated load, not just for empty drawers. This is storage hardware built to cycle daily for years, not a shelving unit repurposed for remnants.

Customizable Tiers for Mixed Remnant Loads

Workshop scrap comes in every size. Herochu’s rack configurability handles the range:

• Layer counts scale from 8 to 15 tiers, matched to ceiling height and remnant volume.
• Clear space between layers adjusts from 30 mm for thin drops up to 100 mm and beyond for plate remnants.
• Load ratings tune from 100 kg to 2000 kg per level, so the same frame supports a drawer of light gauge trim above a drawer of heavy plate offcuts.
• Standard sheet dimensions cover 2000×1000, 2500×1500, and 3000×1500 mm (HC-V2010-15, HC-F2513-15, HC-F3015-122, HC-V2513-8, HC-V3015-8).

Manufacturing Assurance

Herochu produces these racks in an ISO9001-compliant, CE-certified 10,000 m² facility. Every rack undergoes pre-shipment load testing to verify structural integrity at rated capacity before it reaches a workshop floor. For shops that need documentation for insurance, audit, or internal safety review, that manufacturing trail matters.

Organized Remnants, Clearer Floors

A vertical scrap & remnant rack does not add storage — it adds order. The offcuts a workshop already generates become a managed inventory instead of a liability. Herochu’s vertical design makes that order possible within the footprint of a single pallet stack, built to survive the workshop environment and configured to the exact material mix a shop handles.