Motorized Cantilever Telescopic Pipe Material Rack for Tubes, Pipes & Profiles
A pipe yard does not slow down because the material is heavy. It slows down because the material is in the wrong place at the wrong time. A crane operator waits while a forklift shifts a bundle that is blocking the one actually needed. Two workers spend the first hour of the shift rearranging six-meter stock so the cutting line can start. By the time the correct pipe reaches the machine, the shift has already lost its most productive window. A motorized cantilever telescopic pipe material rack addresses that specific failure, not with a taller rack or a wider aisle, but by changing where the material sits when the crane arrives.
Motorized Cantilever Telescopic Pipe Material Rack for Tubes, Pipes & Profiles
A pipe yard does not slow down because the material is heavy. It slows down because the material is in the wrong place at the wrong time. A crane operator waits while a forklift shifts a bundle that is blocking the one actually needed. Two workers spend the first hour of the shift rearranging six-meter stock so the cutting line can start. By the time the correct pipe reaches the machine, the shift has already lost its most productive window. A motorized cantilever telescopic pipe material rack addresses that specific failure, not with a taller rack or a wider aisle, but by changing where the material sits when the crane arrives.
Herochu builds these systems around a single mechanical premise: the tier extends, the load is presented at the aisle edge, and the crane lifts vertically from clear space. A fixed cantilever arm, no matter how well engineered, asks the operator or the crane to reach into the rack structure. The deeper the storage pocket, the longer the reach and the greater the chance of dragging a bundle across an arm lip. A telescopic carriage moves the storage surface outward. Herochu’s arms extend 600 millimeters beyond the carriage frame and can swing out 90 degrees, converting a deep storage pocket into an accessible shelf. The movement is powered on the HC-G series, with single-side or dual-side electric assistance, so an operator does not crank a loaded tier by hand before every pick.
The consequence shows up in cycle time. Herochu’s electric telescopic systems handle single-layer loads of three to eight tonnes, and one operator can pick or replenish an eight-tonne bundle in under two minutes without a second person guiding the load or a forklift repositioning the rack. The retrieval speed is consistent across tiers because the drive moves the carriage at a controlled rate regardless of whether the tier is empty or fully loaded. That consistency matters more than a peak-speed number. A storage system that performs the same way on the last pick of the shift as it did on the first is a system operators trust, and trust is what keeps the rack in use rather than bypassed.
The space arithmetic is equally direct. A 36-meter-long, four-meter-high Herochu system with six cantilever levels stores 720 tonnes of steel pipe in 144 square meters, an 80 percent space saving compared with selective pallet racking in the same footprint. The saving comes from two sources: vertical density and a shared-aisle rail design that lets multiple rack rows open into a single working aisle instead of multiplying forklift lanes. For a warehouse still ground-stacking pipe, the recovered floor space is not an abstract efficiency metric. It is production line area that no longer has to be built.
The frame that carries this duty is Q235 high-strength steel with a dual-beam crossbar design. Telescopic sections for pipe cantilevers use seamless round tubing rather than square tubing, a choice that produces smoother telescoping travel and more predictable behavior under the eccentric loads that bundled pipe creates. Cantilever extension runs from one meter to three meters or can be customized to the load pattern. Column heights reach six meters, with two to six layers as standard. Herochu’s HC-G6055SE and HC-G6055E cover six-meter pipe at 5,000 kg per level; the HC-G9068E and HC-G12068E handle nine- and twelve-meter stock at 8,000 kg per level, with 27 mm/s carriage speed and 700 mm clear space as standard.
What separates a Herochu motorized cantilever telescopic pipe material rack from a generic powered rack is the integration of tier-level selectivity with the structural frame. A bottom tier holding two-inch OD tubing can extend without disturbing the four-inch OD tubing stored above it. For a facility carrying multiple alloys, wall thicknesses, or profile geometries, that selectivity turns storage from a block that must be reorganized into a lookup that can be performed on demand. The material does not have to be found. It is presented.
People Also Ask: What is a motorized cantilever telescopic pipe material rack used for?
It stores pipe, tube, bar stock, and profiles in horizontal layers on cantilever arms that extend outward under electric power. The operator selects a tier, the carriage moves the arms into the aisle, an overhead crane lifts the bundle from clear space, and the tier retracts. Herochu supplies this system for steel service centers, fabrication shops, and construction material warehouses handling six- to twelve-meter stock that needs selective access without dedicating floor space to forklift lanes.
People Also Ask: How much time does a telescopic rack save compared with floor stacking?
A Herochu electric telescopic system can complete a pick in under two minutes with one operator. Floor stacking of six-meter pipe routinely consumes thirty to sixty minutes with two or three people and a forklift because the bundle must be uncovered before it can be lifted. The difference compounds across every shift and every order, and it is the primary source of the labor saving that justifies the investment.
People Also Ask: Can a motorized telescopic rack handle both round pipe and square tube?
Yes. Herochu configures the arm saddle and tier spacing around the actual inventory mix. Round pipe sits in a curved or V-shaped saddle that centers the load and resists rolling. Square and rectangular hollow sections rest flat on the arm surface. Because the telescopic carriage operates per tier, a bay storing both product families does not have to compromise the storage geometry for either one.
FAQ
Here are some frequently asked questions about our sheet metal racks and pipe storage solutions. We hope you find them helpful!
Q1: Can I request a custom size or color?
Absolutely. We offer complimentary design services and deliver efficient, tailored solutions to meet your specific requirements.
Q2: Are you a manufacturer or a distributor?
We are a direct manufacturer with over 15 years of industry experience and expertise.
Q3: Is there a minimum order quantity?
No. We welcome orders of any size, starting from a single unit.
Q4: How can I get detailed product information?
Click the “Get a Quote” button to receive product images, detailed specifications, and videos. Our team is always ready to assist.
Q5: How do I provide my storage rack requirements?
Simply share the type, dimensions, and quantity of materials you plan to store, along with any other specific needs. We will develop a professional storage solution for you. Alternatively, leave your contact details for a personalized consultation.
Q6: Do you offer automated loading systems or robotic arms?
Yes. We provide loading robotic arms and integrated loading/unloading systems tailored to your laser cutting machine’s table size and material handling method (e.g., board rack, exchange platform, or material warehouse). Contact us with your details for a customized proposal.
Q7: Do you provide on-site installation and debugging?
Yes. Our technicians can travel to your facility for installation and debugging, ensuring successful operation. We have served clients globally, including in the USA, South Korea, Russia, Qatar, Mexico, South Africa, Egypt, and Lebanon.
Q8: How do you ensure product quality?
Our quality assurance includes:
A team of over 40 technical engineers for professional debugging and support.
A dedicated quality control department compliant with ISO9001 standards.
CE certification for all exports.
Rigorous load testing before shipment to ensure structural safety and reliability.
Q9: Where is your factory located?
Our modern 10,000-square-meter manufacturing facility is located in Jiyang Industrial Park, Jinan, Shandong, China.
Q10: How can I evaluate your company’s capabilities?
We offer virtual video factory tours and warmly welcome on-site visits.
Q11: What does your company specialize in?
Jinan Constant Storage Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the R&D, production, sales, installation, and service of intelligent storage solutions. Our product range includes sheet material warehouses, drawer-style shelves, cantilever racks, servo manipulators, gantry loaders, and fully automated handling systems. Supported by a skilled technical team and advanced equipment, we are committed to delivering high-performance storage products and solutions to customers worldwide.
Customer visit
Herochu has always been adhering to the market-centric approach to meet customer requirements to the maximum extent, and the business philosophy of “creating brands with heart and gaining reputation with sincerity”. It provides customers with high-quality products and services with rigorous military quality, professionalism, and excellence, and has won unanimous praise in the Chinese aerospace, Chinese weapons, Chinese railways, automobile manufacturing, engineering machinery, non-ferrous metal titanium alloy and other industries.
Factory
Hot Selling Machines
-
Electric Telescopic Pipe Cantilever Storage Rack
High-Density Telescopic Cantilever Rack for Round Pipe and Tube Storage
Read moreRated 0 out of 5 -
Electric Telescopic Pipe Cantilever Storage Rack
Customizable Motorized Telescopic Cantilever Rack for Long Goods
Read moreRated 0 out of 5 -
Electric Telescopic Pipe Cantilever Storage Rack
Heavy Duty Electric Pipe Storage System for Square Pipes & Round Pipes
Read moreRated 0 out of 5 -
Electric Telescopic Pipe Cantilever Storage Rack
Motorized Cantilever Telescopic Pipe Material Rack for Tubes, Pipes & Profiles
Read moreRated 0 out of 5 -
Vertical metal sheet racks
Roll-Out Vertical Sheet Metal Storage Rack for Remnants and Offcuts
Read moreRated 0 out of 5 -
Vertical metal sheet racks
Heavy-Duty Roll-Out Remnant Rack for Sheet Metal
Read moreRated 0 out of 5 -
Vertical metal sheet racks
Vertical Sheet Metal Remnants Rack for Workshop Offcuts
Read moreRated 0 out of 5 -
Vertical metal sheet racks
Vertical Offcut Storage Rack for Laser Cutting Shops
Read moreRated 0 out of 5
Related products
-
Heavy duty sheet metal storage racks
Custom Heavy Duty Pallet Rack Prices Starting at $5,500
Read moreRated 0 out of 5 -
Heavy duty sheet metal storage racks
Sheet metal Storage Solutions Heavy duty Plate Metal Storage Rack Roll Out Drawer Racks
Read moreRated 0 out of 5
















