Herochu Vacuum Hoist Lifting Systems & Vacuum Lifter Manufacturers
CE • UE • ISO 9001 • Custom-built from USD 1,699
Modern laser-cutting lines can only run as fast as the slowest link in the material-handling chain. Herochu—one of the fastest-growing vacuum lifter manufacturers serving Europe, South-East Asia and the Americas—closes that gap with vacuum hoist lifting systems that are dimensioned around your exact floor plan and laser bed. Whether you need to lift 250 kg stainless sheets or 2 t ship-building plates, every system is custom-engineered, certified and priced from only USD 1,699.
- What a Herochu Vacuum Hoist Lifting System Does
A laser-cutting loading machine is an automated auxiliary device whose primary mission is to transport raw sheet or plate to the laser table, position it within ±0.5 mm and release it without scratches. Herochu integrates three proven technologies:
• Mechanical cantilever arm with electric or pneumatic traverse
• Multi-pad vacuum lifter for contact-free gripping of 1–20 mm thick material
• PLC-based vision system that identifies sheet size, edge location and loading sequence
- Core Models – Match Your Laser Bed in One Click
| Model | Max. plate thickness | Max. sheet size | Max. load | Suction cups | Power modes | Typical cycle time |
|---|---|---|---|---|---|---|
| HC-PCL-08 | 1–8 mm | 4000 × 1500 mm | 300 kg | 8 × Ø200 mm | Pneumatic / Electric | 28 s |
| HC-PCL-12 | 1–12 mm | 4000 × 1500 mm | 500 kg | 8 × Ø200 mm | Pneumatic / Electric | 30 s |
| HC-PCL-20 | 1–20 mm | 4000 × 1500 mm | 1000 kg | 8 × Ø250 mm | Pneumatic / Electric | 35 s |
- Cantilever Design – High Space Utilisation
The electric manipulator with versatile cantilever design allows the arm to telescope from 2 m to 5 m and rotate 270° on a single Ø350 mm floor plate. This eliminates the need for overhead cranes in low-ceiling workshops and enables dense storage of long pipes, profiles or timber directly beside the laser cell. - Automated Operating Process – Lights-Out Ready
• Vision camera scans incoming pallets, corrects for ±3° skew
• Vacuum pads engage within 0.8 s; accumulator maintains hold for 15 min after air loss
• Cantilever arm feeds the sheet, retracts and queues the next blank while the laser cuts
Result: 35 % more cutting hours per day and zero manual lifting injuries. - Wide Application Spectrum
Our vacuum hoist lifting systems safely handle:
• Steel, aluminium, copper, brass, titanium
• Non-ferrous sheets, PVC, acrylic, glass, stone slabs
• Mixed stacks—metal + protective film—without edge damage
- Cost & Labour Benefits
• One operator can run two laser shifts instead of four riggers
• Typical ROI < 3 months on 24/7 lines
• 12-month warranty plus remote PLC diagnostics and global spare-pad network - Certification & Compliance
Every Herochu system leaves our Shanghai plant with:
• CE 2006/42/EC Machinery Directive
• UE EMC & Low-Voltage Directives
• ISO 9001:2015 Quality Management System
- Customisation Workflow
- Send workshop layout + max sheet size
- Receive 3-D proposal + cycle-time simulation within 24 h
- Approve drawing; production starts in 7 days; on-site commissioning included
Next Step
Stop losing margin on manual handling. Request your customised vacuum hoist lifting system today—pricing starts at only USD 1,699.
