Every metal fabrication shop knows the scrap pile problem. Leftover sheets, irregular remnants, partially cut panels, and offcuts accumulate against walls, under workbenches, and in corners. Workers step over them, forklifts run over edges, and valuable material goes unused because nobody can find the right piece. The Herochu heavy duty vertical scrap storage rack changes this dynamic by giving remnants the same organized home as full sheets.

Scrap storage presents unique challenges. Remnants come in non-standard sizes – some long and narrow, others short and wide. Many have jagged edges or sharp corners. Traditional shelving allows these pieces to slide around and fall off. Horizontal racks waste floor space on odd-shaped pieces that don’t stack neatly. The vertical roll-out design of Herochu’s scrap rack handles irregular dimensions gracefully because each drawer functions as an independent compartment.

The heavy duty vertical scrap storage rack shares the same rugged construction as Herochu’s standard sheet metal racks. Welded steel frames, full-extension drawer slides rated at 2000 pounds per drawer, and adjustable partition heights. What makes the scrap version different is the interior configuration. Instead of open flat drawers, Herochu offers divided compartments using removable slats. You can set up a drawer with three narrow slots for long thin remnants, another drawer with two wide sections for large offcuts, and a third drawer with UHMW-lined dividers for sensitive material like pre-finished aluminum.

Standard scrap rack models use the HC-V2010-15, HC-F2513-15, and HC-F3015-122 frames, but with higher drawer counts. Since scraps are typically thinner than full sheets, you can fit 20 to 25 drawers in the same height that would hold 15 full sheets. The available height per partition layer reduces to as little as 30mm for very thin materials like copper foil or shim stock. Herochu’s engineering team calculates optimal drawer spacing based on your remnant thickness distribution.

One major advantage of the vertical scrap storage rack is visibility. When scraps lie flat on pallets, you only see the top piece. Workers must move heavy chunks to see what’s underneath – a task nobody does willingly. So scraps get buried and forgotten. Herochu’s roll-out drawers present every piece at eye level. A quick walk down the rack reveals exactly what remnants exist. Some shops color-code drawer handles or attach inventory tags to each drawer for instant identification.

The Dutch origins of this product line emphasize practical durability. The original Netherlands-based family business tested every scrap storage configuration in their own fabrication shop before offering it to customers. Herochu continues that tradition. Each heavy duty vertical scrap storage rack ships only after a 200-cycle test on every drawer slide and a full-load deflection measurement. The professional service team provides recommendations on drawer layouts based on your specific scrap mix – for example, deep drawers for large remnants or shallow high-density drawers for thin sheet scraps.

Safety improves dramatically with organized scrap storage. Uncontrolled scrap piles create trip hazards. Sharp edges cut gloves and arms when workers reach into bins. Heavy remnants leaning against walls can slide and crush feet. Herochu’s rack contains every piece within a drawer. Sharp edges stay inside the drawer cavity. Heavy pieces cannot fall because the drawer extension stop prevents full removal unless intentionally disengaged. For extra safety, add optional drawer covers that shield sharp edges when the drawer is open.

Beyond safety, the scrap rack saves money by reducing reorders. Most fabrication shops order new material for small parts because finding a suitable remnant feels impossible. With organized vertical scrap storage, workers check the rack first. If a 12” x 18” piece of 14-gauge steel exists, they pull it from the drawer and cut the part without touching full inventory. Annual material cost savings typically reach 5% to 10% of total sheet purchases – easily covering the rack’s cost within two years.

Herochu builds the heavy duty vertical scrap storage rack in any size. If your largest remnant measures 2000mm x 1000mm, choose the HC-V2010-15 frame. For longer pieces up to 3000mm, the HC-F3015-122 works well. Custom sizes between 48” x 96” and 60” x 120” are available for North American markets. Drawer options include solid backing (for heavy copper or lead scraps), wire grid panels (for hanging soft materials like rubber or foam), and extra slats (for small pieces that would otherwise shift around). UHMW strips protect both the scrap and the drawer floor from scratching.

Installation takes one day for a standard unit. Herochu provides assembly drawings and video instructions. The rack arrives with pre-drilled components, bolts, and leveling feet. For shops with low ceilings, low-profile models keep total height under 2000mm. For high-bay facilities, stacking configurations place two scrap racks on top of each other with a central walkway. Call Herochu to discuss your scrap volume – the team will recommend drawer count, partition spacing, and any special engineering for heavy or abrasive materials.